Reset
Showing 1-20 of 707 items.
#TypeTitleSourceAuthor  
1Conference Analyses of various viscosity effects to hydrodynamic lubrication in tube spinning processMITC2015-pp 181-182I. Nawi, B.A.M. Zain, W.A. Siswanto, N. Jaffery, H. Wahab
2Conference Characterization of thermal barrier coating on piston crown for high temperature internal combustion engine MITC2015-pp 278-279Helmisyah Ahmad Jalaludin, Muhammad Akmal Fahmi Mohammad, Salmiah Kasolang, Shahrir Abdullah
3Article Effect of SiC weight percentage on tribological properties of Al-SiC metal matrix composites under acid environmentJurnal TribologiSmrutiranjan Pradhan, Tapan K. Barman, Prasanta Sahoo, Goutam Sutradhar
4Conference2D numerical wear model for determining change in surface topography with number of wear cyclesAsiatrib-2018, pp. 233-234Deepak K. Prajapati, Mayank Tiwari
5Conference3D modeling of rough surface from the measurement dataMITC2015-pp 282-283Kartini, E. Saputra, R. Ismail, J. Jamari, A.P. Bayuseno
6Conference3D surface roughness effects on porous journal bearing performancesMITC2015-pp 38-39Mohammedrafi H. Kerur, T. Nagaraju
7ArticleA 3-dimensional computational fluid-structure interaction analysis in the hip-joint prosthesis during solat (prayer) activityJurnal TribologiBayu Siswo Wibowo, Prayudha Naufal Wijaya, Mohammad Tauviqirrahman, Rifky Ismail, Jamari Muchammad
8ConferenceA neural network approach to the metallic surface wear on linear dry contact, plastic material reinforced with SGF/steelAsiatrib-2018, pp.29-30L. Capitanu, V. Vladareanu
9ArticleA neural network approach to the steel surface wear on linear dry contact, plastic material reinforced with SGF/steelJurnalTribologi 22 (2019) 74-107Lucian Capitanu, Victor Vladareanu, Luige Vladareanu, Liliana-Laura Badita
10ConferenceA new ball-on-disk vacuum tribometer with in situ measurement of the wear track by digital holographic microscopyAsiatrib-2018, pp. 109-110B. Zhang, B. Meylan, K Wasmer, E. Cuche
11ConferenceA numerical approach to analyze ground surface texture based on abrasive belt topographyAsiatrib-2018, pp. 193-195W.X. Wang, J.Y. Li, W.G. Fan
12ConferenceA numerical investigation of mechanical behavior of unfilled styrenebutadiene rubber by static straight blade indentation MITC2015-pp 68-69B. Setiyana, R. Ismail, J. Jamari, D.J. Schippe
13ArticleA study of anti-seizure tool coatings of ironing of stainless steelJurnal TribologiM. H. Sulaiman, P. Christiansen, N. Bay
14ConferenceA study of micropolar lubricated conical undulated journal bearings Asiatrib-2018, pp. 386-388Arvind Kumar Rajput, Satish C. Sharma, Nathi Ram
15ConferenceA study on effect of laser textured cast iron surfaces on reducing friction and wearMITC2015-pp 273-274N.A.M. Lazim, S.E.M. Kamal, R. Hasan
16ConferenceA study on powder-pack boronizing of 316 stainless-steel ball bearingMITC2015-pp 261-262N.H. Omar, R. Hasan, N.A.B. Masripan
17ConferenceA Taguchi approach on influence of molybdenum disuphide as an antiwear additive on the performance of lithium greaseAsiatrib-2018, pp. 59-60P.N. Nagare, H.N. Kudal
18ConferenceA three-dimensional computational fluid-structure interaction analysis in the hip-joint prosthesis during transition toward prostration and bowing in the salat activity Asiatrib-2018, pp. 416-417B.S. Wibowo, P.N. Wijaya, M. Tauviqirrahman, R. Ismail, J. Jamari, Muchammad
19ConferenceA unified approach for analysis of wear and fatigueMITC2015-pp 2Michael Khonsari
20ConferenceAbrasive wear rate on natural fibre compositeMITC2015-pp 148-149M.A. Abu Bakar, M.A. Ahmad, S. Kasolang, N.R. Nik Roseley, N.R. Nik Mohd Masdek