Reset
Showing 261-280 of 707 items.
#TypeTitleSourceAuthor  
261ConferenceFRICTION AND WEAR CHARACTERISTICS OF PALM BIODIESEL RTC 077M. A. Fazal, A. S. M. A. Haseeb, H. H. Masjuki
262ConferenceWEAR AND FRICTION CHARACTERISTICS OF WASTE VEGETABLE OIL CONTAMINATED LUBRICANTS NTC-2009-019M. A. Kalam, H. H. Masjuki, and Liaquat Ali Memon
263ConferenceFRICTION AND WEAR CHARACTERISTICS OF WASTE VEGETABLE OIL CONTAMINATED LUBRICANTSRTC 047M. A. Kalam, H. H. Masjuki, M. Varman, and A. M. Liaquat
264ConferenceWEAR PROPERTIES OF Fe-C-Al CAST IRON AND CONVENTIONAL CAST IRON –A COMPARATIVE STUDY RTC 012M. A. Maleque
265ConferenceTRIBOLOGICAL STUDY OF Al-BASED NATURAL FIBRE REINFORCED COMPOSITE BRAKE PAD MATERIALS RTC 020M. A. Maleque, A. R. Zamani, R. J. Talib
266ConferenceNEW NATURAL FIBRE REINFORCED COMPOSITE BRAKE FRICTION MATERIAL RTC 016M. A. Malequea, A. Atiqaha ,R.J. Talibb and H. Zahurina
267ConferenceSURFACE ALLOYING OF Ti-6Al-4V USING Cu-TaC COMPOSITE ELECTRODE DURING ELECTRICAL DISCHARGE MACHINING RTC 072M. B. Ndaliman, A. A. Khan and M. Y. Ali
268ConferenceWEAR PROPERTIES INVESTIGATION OF RAIL AND WHEEL MATERIALS USING PIN-ON-DISK METHODRTC 064M. Bin Sudin and Windarta
269ConferenceTribological characteristic of tool steel surface layer alloyed using laserAsiatrib-2018, pp. 323-324M. Bonek, E. Tillova
270ConferenceTribology issues in low-friction engine surface finishingMITC2015-pp 3M. El Mansori, S. Mezghani, l. Sabri
271ConferenceEFFECT OF 12-HYDROXYSTEARIC ACID ON THE TRIBOLOGICAL PROPERTIES OF ENVIRONMENTAL FRIENDLY LUBRICANTNTC-2009-021M. Farooq, A. Ramli, M. Sudin, M. Nawshad
272ConferenceAW/EP behavior of WS2 nanoparticles added to vegetable oil-based lubricantMITC2015-pp 194-195M. Gulzar, H.H. Masjuki, M.A. Kalam, M. Varman, R.A. Mufti, Rehan Zahid, R. Yunus
273ArticleA study of anti-seizure tool coatings of ironing of stainless steelJurnal TribologiM. H. Sulaiman, P. Christiansen, N. Bay
274ConferenceWEAR STUDY OF COATED/ UNCOATED HIGH SPEED STEEL ON NI-RESIST CAST IRON USING THE COMBINATION OF IONIC LIQUID AND VEGETABLE OIL-BASED LUBRICANT NTC-2009-028M. Husnawan, M.A. Sattar, M.G. Saifullah, H.H. Masjuki, T.M.I. Mahlia
275ArticleThe influence of cutting fluid conditions and machining parameters on cutting performance and wear mechanism of coated carbide toolsJurnal TribologiM. J. Mir, M. F. Wani
276ConferenceNEURO-FUZZY GENETIC ALGORITHM NTC-2009-025M. Jalali V, L.S. Lee
277ArticlePerformance evaluation of PCBN, coated carbide and mixed ceramic inserts in finish-turning of AISI D2 steelJurnal TribologiM. Junaid Mir, M.F. Wani
278ConferenceSTUDY OF FRICTIONAL CHARACTERISTICS AND EXTERNAL HARD PARTICLE EMBEDMENT IN AUTOMOTIVE BRAKING SYSTEM DURING HARD BRAKING RTC 069M. K. Abdul Hamid, G.W. Stachowiak and S.Samion
279ConferenceInvestigation into effect of silicon morphology on surface roughness while machining Al-Si-Cu-Mg alloyMITC2015-pp 238-239M. Marani Barzani, A.A.D. Sarhan. S. Ramesh, I. Mahe, S. Farahany
280ConferenceApplication of Box-Behnken experimental design to optimize the magnetic actuation parameters’ for driving fluid in micro pumpAsiatrib-2018, pp. 343-345M. Mazwan Mahat, S. Kasolang